eHealth Infrastructure
2.10.0 - release

eHealth Infrastructure - Local Development build (v2.10.0). See the Directory of published versions

Resource Profile: ehealth-activitydefinition - Detailed Descriptions

Active as of 2023-10-24

Definitions for the ehealth-activitydefinition resource profile.

Guidance on how to interpret the contents of this table can be found here.

1. ActivityDefinition
2. ActivityDefinition.extension
Control20..*
SlicingThis element introduces a set of slices on ActivityDefinition.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
3. ActivityDefinition.extension:reuseCriteria
SliceNamereuseCriteria
Control0..1
TypeExtension(ehealth-reuseCriteria) (Complex Extension)
4. ActivityDefinition.extension:recommendation
SliceNamerecommendation
Control0..1
TypeExtension(ehealth-recommendation) (Extension Type: CodeableConcept)
5. ActivityDefinition.extension:intendedAudience
SliceNameintendedAudience
Control0..*
TypeExtension(ehealth-intendedAudience) (Extension Type: Reference(ehealth-organization) : {r})
6. ActivityDefinition.extension:referenceRange
SliceNamereferenceRange
Control0..*
TypeExtension(ehealth-referenceRange) (Complex Extension)
7. ActivityDefinition.extension:modifierRole
SliceNamemodifierRole
Control1..*
TypeExtension(ehealth-modifier-role) (Complex Extension)
8. ActivityDefinition.extension:quality
SliceNamequality
Control0..*
TypeExtension(ehealth-quality) (Complex Extension)
9. ActivityDefinition.extension:sharingPolicy
SliceNamesharingPolicy
Control1..1
TypeExtension(ehealth-sharingPolicy) (Extension Type: CodeableConcept)
10. ActivityDefinition.extension:employeeTitle
SliceNameemployeeTitle
Control0..1
TypeExtension(ehealth-employee-title) (Extension Type: string)
11. ActivityDefinition.extension:predecessor
SliceNamepredecessor
Control0..1
TypeExtension(ehealth-predecessor) (Extension Type: Identifier)
12. ActivityDefinition.extension:base
SliceNamebase
Control0..1
TypeExtension(ehealth-base) (Extension Type: Identifier)
13. ActivityDefinition.extension:baseEnvironment
SliceNamebaseEnvironment
Control0..1
TypeExtension(ehealth-base-environment) (Extension Type: Identifier)
14. ActivityDefinition.version
NoteThis is a business versionId, not a resource version id (see discussion)
Control10..1
15. ActivityDefinition.jurisdiction
BindingThe codes SHALL be taken from JurisdictionThe codes SHALL be taken from Jurisdiction ValueSet; other codes may be used where these codes are not suitable
16. ActivityDefinition.topic
Control10..1*
BindingThe codes SHALL be taken from Topic TypeFor example codes, see DefinitionTopic
17. ActivityDefinition.library
Typecanonical(ehealth-library|Library)
18. ActivityDefinition.code
Control10..1
BindingThe codes SHALL be taken from Activity Definition CodeFor example codes, see ProcedureCodes(SNOMEDCT)
19. ActivityDefinition.location
TypeReference(Location) : {r}

Guidance on how to interpret the contents of this table can be found here.

1. ActivityDefinition
Definition

This resource allows for the definition of some activity to be performed, independent of a particular patient, practitioner, or other performance context.

Control0..*
Summaryfalse
InvariantsDefined on this element
adf-0: Name should be usable as an identifier for the module by machine processing applications such as code generation (: name.matches('[A-Z]([A-Za-z0-9_]){0,254}'))
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (: text.`div`.exists())
2. ActivityDefinition.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Summarytrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
3. ActivityDefinition.extension
Definition

An Extension

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control20..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on ActivityDefinition.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
4. ActivityDefinition.extension:reuseCriteria
SliceNamereuseCriteria
Definition

Defines if and when a response can be reused

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..1* This element is affected by the following invariants: ele-1
TypeExtension(ehealth-reuseCriteria) (Complex Extension)
InvariantsDefined on this element
ele-1: (: )
ext-1: (: )
5. ActivityDefinition.extension:recommendation
SliceNamerecommendation
Definition

Recommendation state of the plan definition

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(ehealth-recommendation) (Extension Type: CodeableConcept)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
6. ActivityDefinition.extension:intendedAudience
SliceNameintendedAudience
Definition

Specifies that the resource is only intended for use in the specified organisations. Leave blank if the resource is intended for global use.

Control0..* This element is affected by the following invariants: ele-1
TypeExtension(ehealth-intendedAudience) (Extension Type: Reference(ehealth-organization) : {r})
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
7. ActivityDefinition.extension:referenceRange
SliceNamereferenceRange
Definition

Provides guide for interpretation. Must have at least a low or a high.

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control This element is affected by the following invariants: ele-1
TypeExtension(ehealth-referenceRange) (Complex Extension)
InvariantsDefined on this element
ele-1: (: )
ext-1: (: )
8. ActivityDefinition.extension:modifierRole
SliceNamemodifierRole
Definition

This is a modifier role that can hold a role and a reference to the item who has the role. Ex. owner + a reference to the owner organization.

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control10..* This element is affected by the following invariants: ele-1
TypeExtension(ehealth-modifier-role) (Complex Extension)
InvariantsDefined on this element
ele-1: (: )
ext-1: (: )
9. ActivityDefinition.extension:quality
SliceNamequality
Definition

Minimum required or actually assessed quality values. The qualityType element states the type of quality. For different values of qualityType the required or assessed quality value (qualityCode) must be from different value sets. The relation between qualityType and allowed value sets are defined in the definition of value set http://ehealth.sundhed.dk/vs/quality-types.

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control This element is affected by the following invariants: ele-1
TypeExtension(ehealth-quality) (Complex Extension)
InvariantsDefined on this element
ele-1: (: )
ext-1: (: )
10. ActivityDefinition.extension:sharingPolicy
SliceNamesharingPolicy
Definition

Policy for sharing a resource with national data banks

Control1..1 This element is affected by the following invariants: ele-1
TypeExtension(ehealth-sharingPolicy) (Extension Type: CodeableConcept)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
11. ActivityDefinition.extension:employeeTitle
SliceNameemployeeTitle
Definition

Title for employed clinicians

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(ehealth-employee-title) (Extension Type: string)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
12. ActivityDefinition.extension:predecessor
SliceNamepredecessor
Definition

Version Predecessor

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(ehealth-predecessor) (Extension Type: Identifier)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
13. ActivityDefinition.extension:base
SliceNamebase
Definition

Version Base

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(ehealth-base) (Extension Type: Identifier)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
14. ActivityDefinition.extension:baseEnvironment
SliceNamebaseEnvironment
Definition

Base environment

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(ehealth-base-environment) (Extension Type: Identifier)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
15. ActivityDefinition.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
16. ActivityDefinition.version
Definition

The identifier that is used to identify this version of the activity definition when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the activity definition author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence. To provide a version consistent with the Decision Support Service specification, use the format Major.Minor.Revision (e.g. 1.0.0). For more information on versioning knowledge assets, refer to the Decision Support Service specification. Note that a version is required for non-experimental active assets.

NoteThis is a business versionId, not a resource version id (see discussion)
Control10..1
Typestring
Summarytrue
Comments

There may be different activity definition instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the activity definition with the format [url]|[version].

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
17. ActivityDefinition.status
Definition

The status of this activity definition. Enables tracking the life-cycle of the content.

Control1..1
BindingThe codes SHALL be taken from PublicationStatus

The lifecycle status of an artifact.

Typecode
Is Modifiertrue
Summarytrue
Comments

Allows filtering of activity definitions that are appropriate for use versus not.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
18. ActivityDefinition.jurisdiction
Definition

A legal or geographic region in which the activity definition is intended to be used.

Control0..*
BindingThe codes SHALL be taken from JurisdictionThe codes SHALL be taken from Jurisdiction ValueSet; other codes may be used where these codes are not suitable
TypeCodeableConcept
Summarytrue
Comments

It may be possible for the activity definition to be used in jurisdictions other than those for which it was originally designed or intended.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
19. ActivityDefinition.topic
Definition

Descriptive topics related to the content of the activity. Topics provide a high-level categorization of the activity that can be useful for filtering and searching.

Control10..1*
BindingThe codes SHALL be taken from Topic TypeFor example codes, see DefinitionTopic
TypeCodeableConcept
Summaryfalse
Requirements

Repositories must be able to determine how to categorize the activity definition so that it can be found by topical searches.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
20. ActivityDefinition.library
Definition

A reference to a Library resource containing any formal logic used by the activity definition.

Control0..*
Typecanonical(ehealth-library|Library)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
21. ActivityDefinition.code
Definition

Detailed description of the type of activity; e.g. What lab test, what procedure, what kind of encounter.

Control10..1
BindingThe codes SHALL be taken from Activity Definition CodeFor example codes, see ProcedureCodes(SNOMEDCT)
TypeCodeableConcept
Summarytrue
Requirements

Allows matching performed to planned as well as validation against protocols.

Comments

Tends to be less relevant for activities involving particular products.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
22. ActivityDefinition.doNotPerform
Definition

Set this to true if the definition is to indicate that a particular activity should NOT be performed. If true, this element should be interpreted to reinforce a negative coding. For example NPO as a code with a doNotPerform of true would still indicate to NOT perform the action.

Control0..1
Typeboolean
Is Modifiertrue
Summarytrue
Comments

This element is not intended to be used to communicate a decision support response to cancel an order in progress. That should be done with the "remove" type of a PlanDefinition or RequestGroup.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
23. ActivityDefinition.location
Definition

Identifies the facility where the activity will occur; e.g. home, hospital, specific clinic, etc.

Control0..1
TypeReference(Location) : {r}
Summaryfalse
Requirements

Helps in planning of activity.

Alternate Namesfacility
Comments

May reference a specific clinical location or may just identify a type of location.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here.

1. ActivityDefinition
Definition

This resource allows for the definition of some activity to be performed, independent of a particular patient, practitioner, or other performance context.

Control0..*
Summaryfalse
2. ActivityDefinition.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Control0..1
Typeid
Summarytrue
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

3. ActivityDefinition.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Control0..1
TypeMeta
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
4. ActivityDefinition.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Summarytrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
5. ActivityDefinition.language
Definition

The base language in which the resource is written.

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages A human language
Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Summaryfalse
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. ActivityDefinition.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Control0..1
TypeNarrative
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. ActivityDefinition.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Control0..*
TypeResource
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

8. ActivityDefinition.extension
Definition

An Extension

Control2..*
TypeExtension
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on ActivityDefinition.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
9. ActivityDefinition.extension:reuseCriteria
SliceNamereuseCriteria
Definition

Defines if and when a response can be reused

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(ehealth-reuseCriteria) (Complex Extension)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
10. ActivityDefinition.extension:recommendation
SliceNamerecommendation
Definition

Recommendation state of the plan definition

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(ehealth-recommendation) (Extension Type: CodeableConcept)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
11. ActivityDefinition.extension:intendedAudience
SliceNameintendedAudience
Definition

Specifies that the resource is only intended for use in the specified organisations. Leave blank if the resource is intended for global use.

Control0..* This element is affected by the following invariants: ele-1
TypeExtension(ehealth-intendedAudience) (Extension Type: Reference(ehealth-organization) : {r})
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
12. ActivityDefinition.extension:referenceRange
SliceNamereferenceRange
Definition

Provides guide for interpretation. Must have at least a low or a high.

Control0..* This element is affected by the following invariants: ele-1
TypeExtension(ehealth-referenceRange) (Complex Extension)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
13. ActivityDefinition.extension:modifierRole
SliceNamemodifierRole
Definition

This is a modifier role that can hold a role and a reference to the item who has the role. Ex. owner + a reference to the owner organization.

Control1..* This element is affected by the following invariants: ele-1
TypeExtension(ehealth-modifier-role) (Complex Extension)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
14. ActivityDefinition.extension:quality
SliceNamequality
Definition

Minimum required or actually assessed quality values. The qualityType element states the type of quality. For different values of qualityType the required or assessed quality value (qualityCode) must be from different value sets. The relation between qualityType and allowed value sets are defined in the definition of value set http://ehealth.sundhed.dk/vs/quality-types.

Control0..* This element is affected by the following invariants: ele-1
TypeExtension(ehealth-quality) (Complex Extension)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
15. ActivityDefinition.extension:sharingPolicy
SliceNamesharingPolicy
Definition

Policy for sharing a resource with national data banks

Control1..1 This element is affected by the following invariants: ele-1
TypeExtension(ehealth-sharingPolicy) (Extension Type: CodeableConcept)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
16. ActivityDefinition.extension:employeeTitle
SliceNameemployeeTitle
Definition

Title for employed clinicians

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(ehealth-employee-title) (Extension Type: string)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
17. ActivityDefinition.extension:predecessor
SliceNamepredecessor
Definition

Version Predecessor

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(ehealth-predecessor) (Extension Type: Identifier)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
18. ActivityDefinition.extension:base
SliceNamebase
Definition

Version Base

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(ehealth-base) (Extension Type: Identifier)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
19. ActivityDefinition.extension:baseEnvironment
SliceNamebaseEnvironment
Definition

Base environment

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(ehealth-base-environment) (Extension Type: Identifier)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
20. ActivityDefinition.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
21. ActivityDefinition.url
Definition

An absolute URI that is used to identify this activity definition when it is referenced in a specification, model, design or an instance; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which at which an authoritative instance of this activity definition is (or will be) published. This URL can be the target of a canonical reference. It SHALL remain the same when the activity definition is stored on different servers.

Control0..1
Typeuri
Summarytrue
Requirements

Allows the activity definition to be referenced by a single globally unique identifier.

Comments

Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.

The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in Technical and Business Versions.

In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
22. ActivityDefinition.identifier
Definition

A formal identifier that is used to identify this activity definition when it is represented in other formats, or referenced in a specification, model, design or an instance.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Summarytrue
Requirements

Allows externally provided and/or usable business identifiers to be easily associated with the module.

Comments

Typically, this is used for identifiers that can go in an HL7 V3 II (instance identifier) data type, and can then identify this activity definition outside of FHIR, where it is not possible to use the logical URI.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
23. ActivityDefinition.version
Definition

The identifier that is used to identify this version of the activity definition when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the activity definition author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence. To provide a version consistent with the Decision Support Service specification, use the format Major.Minor.Revision (e.g. 1.0.0). For more information on versioning knowledge assets, refer to the Decision Support Service specification. Note that a version is required for non-experimental active assets.

NoteThis is a business versionId, not a resource version id (see discussion)
Control1..1
Typestring
Summarytrue
Comments

There may be different activity definition instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the activity definition with the format [url]|[version].

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
24. ActivityDefinition.name
Definition

A natural language name identifying the activity definition. This name should be usable as an identifier for the module by machine processing applications such as code generation.

Control0..1 This element is affected by the following invariants: inv-0
Typestring
Summarytrue
Requirements

Support human navigation and code generation.

Comments

The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
25. ActivityDefinition.title
Definition

A short, descriptive, user-friendly title for the activity definition.

Control0..1
Typestring
Summarytrue
Comments

This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
26. ActivityDefinition.subtitle
Definition

An explanatory or alternate title for the activity definition giving additional information about its content.

Control0..1
Typestring
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
27. ActivityDefinition.status
Definition

The status of this activity definition. Enables tracking the life-cycle of the content.

Control1..1
BindingThe codes SHALL be taken from PublicationStatus The lifecycle status of an artifact
Typecode
Is Modifiertrue
Summarytrue
Comments

Allows filtering of activity definitions that are appropriate for use versus not.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
28. ActivityDefinition.experimental
Definition

A Boolean value to indicate that this activity definition is authored for testing purposes (or education/evaluation/marketing) and is not intended to be used for genuine usage.

Control0..1
Typeboolean
Summarytrue
Requirements

Enables experimental content to be developed following the same lifecycle that would be used for a production-level activity definition.

Comments

Allows filtering of activity definitions that are appropriate for use versus not.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
29. ActivityDefinition.subject[x]
Definition

A code or group definition that describes the intended subject of the activity being defined.

Control0..1
BindingThe codes SHALL be taken from SubjectType; other codes may be used where these codes are not suitable The possible types of subjects for an activity (E.g. Patient, Practitioner, Organization, Location, etc.)
TypeChoice of: CodeableConcept, Reference(Group)
[x] NoteSee Choice of Data Types for further information about how to use [x]
Summaryfalse
Meaning if MissingPatient
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
30. ActivityDefinition.date
Definition

The date (and optionally time) when the activity definition was published. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the activity definition changes.

Control0..1
TypedateTime
Summarytrue
Alternate NamesRevision Date
Comments

Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the activity definition. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
31. ActivityDefinition.publisher
Definition

The name of the organization or individual that published the activity definition.

Control0..1
Typestring
Summarytrue
Requirements

Helps establish the "authority/credibility" of the activity definition. May also allow for contact.

Comments

Usually an organization but may be an individual. The publisher (or steward) of the activity definition is the organization or individual primarily responsible for the maintenance and upkeep of the activity definition. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the activity definition. This item SHOULD be populated unless the information is available from context.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
32. ActivityDefinition.contact
Definition

Contact details to assist a user in finding and communicating with the publisher.

Control0..*
TypeContactDetail
Summarytrue
Comments

May be a web site, an email address, a telephone number, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
33. ActivityDefinition.description
Definition

A free text natural language description of the activity definition from a consumer's perspective.

Control0..1
Typemarkdown
Summarytrue
Comments

This description can be used to capture details such as why the activity definition was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the activity definition as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the activity definition is presumed to be the predominant language in the place the activity definition was created).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
34. ActivityDefinition.useContext
Definition

The content was developed with a focus and intent of supporting the contexts that are listed. These contexts may be general categories (gender, age, ...) or may be references to specific programs (insurance plans, studies, ...) and may be used to assist with indexing and searching for appropriate activity definition instances.

Control0..*
TypeUsageContext
Summarytrue
Requirements

Assist in searching for appropriate content.

Comments

When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
35. ActivityDefinition.jurisdiction
Definition

A legal or geographic region in which the activity definition is intended to be used.

Control0..*
BindingThe codes SHALL be taken from Jurisdiction
TypeCodeableConcept
Summarytrue
Comments

It may be possible for the activity definition to be used in jurisdictions other than those for which it was originally designed or intended.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
36. ActivityDefinition.purpose
Definition

Explanation of why this activity definition is needed and why it has been designed as it has.

Control0..1
Typemarkdown
Summaryfalse
Comments

This element does not describe the usage of the activity definition. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this activity definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
37. ActivityDefinition.usage
Definition

A detailed description of how the activity definition is used from a clinical perspective.

Control0..1
Typestring
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
38. ActivityDefinition.copyright
Definition

A copyright statement relating to the activity definition and/or its contents. Copyright statements are generally legal restrictions on the use and publishing of the activity definition.

Control0..1
Typemarkdown
Summaryfalse
Requirements

Consumers must be able to determine any legal restrictions on the use of the activity definition and/or its content.

Alternate NamesLicense, Restrictions
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
39. ActivityDefinition.approvalDate
Definition

The date on which the resource content was approved by the publisher. Approval happens once when the content is officially approved for usage.

Control0..1
Typedate
Summaryfalse
Comments

The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
40. ActivityDefinition.lastReviewDate
Definition

The date on which the resource content was last reviewed. Review happens periodically after approval but does not change the original approval date.

Control0..1
Typedate
Summaryfalse
Requirements

Gives a sense of how "current" the content is. Resources that have not been reviewed in a long time may have a risk of being less appropriate/relevant.

Comments

If specified, this date follows the original approval date.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
41. ActivityDefinition.effectivePeriod
Definition

The period during which the activity definition content was or is planned to be in active use.

Control0..1
TypePeriod
Summarytrue
Requirements

Allows establishing a transition before a resource comes into effect and also allows for a sunsetting process when new versions of the activity definition are or are expected to be used instead.

Comments

The effective period for a activity definition determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
42. ActivityDefinition.topic
Definition

Descriptive topics related to the content of the activity. Topics provide a high-level categorization of the activity that can be useful for filtering and searching.

Control1..1
BindingThe codes SHALL be taken from Topic Type
TypeCodeableConcept
Summaryfalse
Requirements

Repositories must be able to determine how to categorize the activity definition so that it can be found by topical searches.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
43. ActivityDefinition.author
Definition

An individiual or organization primarily involved in the creation and maintenance of the content.

Control0..*
TypeContactDetail
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
44. ActivityDefinition.editor
Definition

An individual or organization primarily responsible for internal coherence of the content.

Control0..*
TypeContactDetail
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
45. ActivityDefinition.reviewer
Definition

An individual or organization primarily responsible for review of some aspect of the content.

Control0..*
TypeContactDetail
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
46. ActivityDefinition.endorser
Definition

An individual or organization responsible for officially endorsing the content for use in some setting.

Control0..*
TypeContactDetail
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
47. ActivityDefinition.relatedArtifact
Definition

Related artifacts such as additional documentation, justification, or bibliographic references.

Control0..*
TypeRelatedArtifact
Summaryfalse
Requirements

Activity definitions must be able to provide enough information for consumers of the content (and/or interventions or results produced by the content) to be able to determine and understand the justification for and evidence in support of the content.

Comments

Each related artifact is either an attachment, or a reference to another resource, but not both.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
48. ActivityDefinition.library
Definition

A reference to a Library resource containing any formal logic used by the activity definition.

Control0..*
Typecanonical(ehealth-library)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
49. ActivityDefinition.kind
Definition

A description of the kind of resource the activity definition is representing. For example, a MedicationRequest, a ServiceRequest, or a CommunicationRequest. Typically, but not always, this is a Request resource.

Control0..1
BindingThe codes SHALL be taken from RequestResourceType The kind of activity the definition is describing
Typecode
Summarytrue
Comments

May determine what types of extensions are permitted.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
50. ActivityDefinition.profile
Definition

A profile to which the target of the activity definition is expected to conform.

Control0..1
Typecanonical(StructureDefinition)
Summaryfalse
Requirements

Allows profiles to be used to describe the types of activities that can be performed within a workflow, protocol, or order set.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
51. ActivityDefinition.code
Definition

Detailed description of the type of activity; e.g. What lab test, what procedure, what kind of encounter.

Control1..1
BindingThe codes SHALL be taken from Activity Definition Code
TypeCodeableConcept
Summarytrue
Requirements

Allows matching performed to planned as well as validation against protocols.

Comments

Tends to be less relevant for activities involving particular products.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
52. ActivityDefinition.intent
Definition

Indicates the level of authority/intentionality associated with the activity and where the request should fit into the workflow chain.

Control0..1
BindingThe codes SHALL be taken from RequestIntent Codes indicating the degree of authority/intentionality associated with a request
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
53. ActivityDefinition.priority
Definition

Indicates how quickly the activity should be addressed with respect to other requests.

Control0..1
BindingThe codes SHALL be taken from RequestPriority Identifies the level of importance to be assigned to actioning the request
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
54. ActivityDefinition.doNotPerform
Definition

Set this to true if the definition is to indicate that a particular activity should NOT be performed. If true, this element should be interpreted to reinforce a negative coding. For example NPO as a code with a doNotPerform of true would still indicate to NOT perform the action.

Control0..1
Typeboolean
Is Modifiertrue
Summarytrue
Comments

This element is not intended to be used to communicate a decision support response to cancel an order in progress. That should be done with the "remove" type of a PlanDefinition or RequestGroup.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
55. ActivityDefinition.timing[x]
Definition

The period, timing or frequency upon which the described activity is to occur.

Control0..1
TypeChoice of: Timing, dateTime, Age, Period, Range, Duration
[x] NoteSee Choice of Data Types for further information about how to use [x]
Summaryfalse
Requirements

Allows prompting for activities and detection of missed planned activities.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
56. ActivityDefinition.location
Definition

Identifies the facility where the activity will occur; e.g. home, hospital, specific clinic, etc.

Control0..1
TypeReference(Location) : {r}
Summaryfalse
Requirements

Helps in planning of activity.

Alternate Namesfacility
Comments

May reference a specific clinical location or may just identify a type of location.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
57. ActivityDefinition.participant
Definition

Indicates who should participate in performing the action described.

Control0..*
TypeBackboneElement
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
58. ActivityDefinition.participant.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
59. ActivityDefinition.participant.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
60. ActivityDefinition.participant.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
61. ActivityDefinition.participant.type
Definition

The type of participant in the action.

Control1..1
BindingThe codes SHALL be taken from ActionParticipantType The type of participant in the activity
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
62. ActivityDefinition.participant.role
Definition

The role the participant should play in performing the described action.

Control0..1
BindingFor example codes, see ActionParticipantRole Defines roles played by participants for the action
TypeCodeableConcept
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
63. ActivityDefinition.product[x]
Definition

Identifies the food, drug or other product being consumed or supplied in the activity.

Control0..1
BindingFor example codes, see SNOMEDCTMedicationCodes Code describing the type of substance or medication
TypeChoice of: Reference(Medication|Substance), CodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
64. ActivityDefinition.quantity
Definition

Identifies the quantity expected to be consumed at once (per dose, per meal, etc.).

Control0..1
TypeQuantity(SimpleQuantity)
Summaryfalse
Alternate Namesdose
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
65. ActivityDefinition.dosage
Definition

Provides detailed dosage instructions in the same way that they are described for MedicationRequest resources.

Control0..*
TypeDosage
Summaryfalse
Comments

If a dosage instruction is used, the definition should not specify timing or quantity.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
66. ActivityDefinition.bodySite
Definition

Indicates the sites on the subject's body where the procedure should be performed (I.e. the target sites).

Control0..*
BindingFor example codes, see SNOMEDCTBodyStructures A code that identifies the anatomical location
TypeCodeableConcept
Summaryfalse
Requirements

Knowing where the procedure is made is important for tracking if multiple sites are possible.

Comments

Only used if not implicit in the code found in ServiceRequest.type.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
67. ActivityDefinition.specimenRequirement
Definition

Defines specimen requirements for the action to be performed, such as required specimens for a lab test.

Control0..*
TypeReference(SpecimenDefinition)
Summaryfalse
Requirements

Needed to represent lab order definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
68. ActivityDefinition.observationRequirement
Definition

Defines observation requirements for the action to be performed, such as body weight or surface area.

Control0..*
TypeReference(ObservationDefinition)
Summaryfalse
Requirements

Needed to represent observation definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
69. ActivityDefinition.observationResultRequirement
Definition

Defines the observations that are expected to be produced by the action.

Control0..*
TypeReference(ObservationDefinition)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
70. ActivityDefinition.transform
Definition

A reference to a StructureMap resource that defines a transform that can be executed to produce the intent resource using the ActivityDefinition instance as the input.

Control0..1
Typecanonical(StructureMap)
Summaryfalse
Comments

Note that if both a transform and dynamic values are specified, the dynamic values will be applied to the result of the transform.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
71. ActivityDefinition.dynamicValue
Definition

Dynamic values that will be evaluated to produce values for elements of the resulting resource. For example, if the dosage of a medication must be computed based on the patient's weight, a dynamic value would be used to specify an expression that calculated the weight, and the path on the request resource that would contain the result.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

Dynamic values are applied in the order in which they are defined in the ActivityDefinition. Note that if both a transform and dynamic values are specified, the dynamic values will be applied to the result of the transform.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
72. ActivityDefinition.dynamicValue.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
73. ActivityDefinition.dynamicValue.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
74. ActivityDefinition.dynamicValue.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
75. ActivityDefinition.dynamicValue.path
Definition

The path to the element to be customized. This is the path on the resource that will hold the result of the calculation defined by the expression. The specified path SHALL be a FHIRPath resolveable on the specified target type of the ActivityDefinition, and SHALL consist only of identifiers, constant indexers, and a restricted subset of functions. The path is allowed to contain qualifiers (.) to traverse sub-elements, as well as indexers ([x]) to traverse multiple-cardinality sub-elements (see the Simple FHIRPath Profile for full details).

Control1..1
Typestring
Summaryfalse
Comments

The path attribute contains a Simple FHIRPath Subset that allows path traversal, but not calculation.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
76. ActivityDefinition.dynamicValue.expression
Definition

An expression specifying the value of the customized element.

Control1..1
TypeExpression
Summaryfalse
Comments

The expression may be inlined, or may be a reference to a named expression within a logic library referenced by the library element.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))