eHealth Infrastructure - Local Development build (v2.4.0). See the Directory of published versions
Active as of 2022-10-14 |
Definitions for the ehealth-resolved-timing extension.
1. Extension | |
Definition | Resolved timing reflects whether a measurement (Observation, QuestionnaireResponse or Media) has been performed ad-hoc or as fulfillment of a measurement regime time slot in which case the extent of the time slot is given by start and end. If the measurement regime has a form for which a time slot cannot be resolved or determining is/was not supported, the type unresolved is used. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
2. Extension.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
3. Extension.extension | |
Definition | An Extension |
Control | 2..* |
Type | Extension |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
4. Extension.extension:serviceRequestVersionId | |
SliceName | serviceRequestVersionId |
Definition | An Extension |
Control | 1..1 |
Type | Extension |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
5. Extension.extension:serviceRequestVersionId.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
6. Extension.extension:serviceRequestVersionId.extension | |
Definition | An Extension |
Control | 0..0 |
Type | Extension |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
7. Extension.extension:serviceRequestVersionId.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Type | uri |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | serviceRequestVersionId |
8. Extension.extension:serviceRequestVersionId.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Control | 1..1 |
Type | id |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on Extension.extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
|
9. Extension.extension:serviceRequestVersionId.value[x]:valueId | |
SliceName | valueId |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Control | 1..1 |
Type | id |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
10. Extension.extension:start | |
SliceName | start |
Definition | An Extension |
Control | 0..1 |
Type | Extension |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
11. Extension.extension:start.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
12. Extension.extension:start.extension | |
Definition | An Extension |
Control | 0..0 |
Type | Extension |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
13. Extension.extension:start.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Type | uri |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | start |
14. Extension.extension:start.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Control | 1..1 |
Type | dateTime |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on Extension.extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
|
15. Extension.extension:start.value[x]:valueDateTime | |
SliceName | valueDateTime |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Control | 1..1 |
Type | dateTime |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
16. Extension.extension:end | |
SliceName | end |
Definition | An Extension |
Control | 0..1 |
Type | Extension |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
17. Extension.extension:end.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
18. Extension.extension:end.extension | |
Definition | An Extension |
Control | 0..0 |
Type | Extension |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
19. Extension.extension:end.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Type | uri |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | end |
20. Extension.extension:end.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Control | 1..1 |
Type | dateTime |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on Extension.extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
|
21. Extension.extension:end.value[x]:valueDateTime | |
SliceName | valueDateTime |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Control | 1..1 |
Type | dateTime |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
22. Extension.extension:type | |
SliceName | type |
Definition | An Extension |
Control | 1..1 |
Type | Extension |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
23. Extension.extension:type.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
24. Extension.extension:type.extension | |
Definition | An Extension |
Control | 0..0 |
Type | Extension |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
25. Extension.extension:type.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Type | uri |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | type |
26. Extension.extension:type.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Control | 1..1 |
Type | CodeableConcept |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on Extension.extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
|
27. Extension.extension:type.value[x]:valueCodeableConcept | |
SliceName | valueCodeableConcept |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Control | 1..1 |
Binding | The codes SHALL be taken from Resolved Timing Type |
Type | CodeableConcept |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
28. Extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Type | uri |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-resolved-timing |
29. Extension.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Control | 0..0 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |