eHealth Infrastructure
2.9.0 - release

eHealth Infrastructure - Local Development build (v2.9.0). See the Directory of published versions

Resource Profile: ehealth-clinicalimpression - Detailed Descriptions

Active as of 2023-08-23

Definitions for the ehealth-clinicalimpression resource profile.

Guidance on how to interpret the contents of this table can be found here.

1. ClinicalImpression
2. ClinicalImpression.extension
Control10..*
SlicingThis element introduces a set of slices on ClinicalImpression.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
3. ClinicalImpression.extension:carePlan
SliceNamecarePlan
Control0..1
TypeExtension(ehealth-clinicalimpression-careplan) (Extension Type: Reference(ehealth-careplan) : {r})
4. ClinicalImpression.extension:decisionContext
SliceNamedecisionContext
Control0..*
TypeExtension(ehealth-clinicalimpression-decisionContext) (Extension Type: Reference(Parameters) : {r}, {c})
5. ClinicalImpression.extension:decision
SliceNamedecision
Control0..*
TypeExtension(ehealth-clinicalimpression-decision) (Extension Type: CodeableConcept)
6. ClinicalImpression.extension:episodeOfCare
SliceNameepisodeOfCare
Control1..1
TypeExtension(episodeOfCare) (Extension Type: Reference(EpisodeOfCare))
7. ClinicalImpression.extension:findingBasis
SliceNamefindingBasis
Control0..*
TypeExtension(ehealth-questionnaireresponse-finding-basis) (Complex Extension)
8. ClinicalImpression.code
Control10..1
BindingThe codes SHALL be taken from Clinical Impression CodesFor example codes, see (unbound)
9. ClinicalImpression.subject
TypeReference(ehealth-patient|Patient|Group) : {r}
10. ClinicalImpression.assessor
TypeReference(ehealth-practitioner|Practitioner|PractitionerRole) : {r}
11. ClinicalImpression.previous
TypeReference(ehealth-clinicalimpression|ClinicalImpression) : {r}
12. ClinicalImpression.problem
TypeReference(ehealth-condition|AllergyIntolerance|Condition) : {r}
13. ClinicalImpression.investigation
Control0..?
14. ClinicalImpression.investigation.extension
SlicingThis element introduces a set of slices on ClinicalImpression.investigation.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
15. ClinicalImpression.investigation.extension:viewInvestigationItem
SliceNameviewInvestigationItem
Control0..*
TypeExtension(ehealth-clinicalimpression-viewInvestigationItem) (Extension Type: Reference(ehealth-view) : {r})
16. ClinicalImpression.investigation.item
TypeReference(ehealth-media|ehealth-observation|ehealth-questionnaireresponse|FamilyMemberHistory|DiagnosticReport|RiskAssessment|ImagingStudy|Observation|QuestionnaireResponse|Media) : {r}
17. ClinicalImpression.finding
Control0..?
18. ClinicalImpression.finding.itemCodeableConcept
BindingThe codes SHALL be taken from ClinicalImpression Finding CodesFor example codes, see Condition/Problem/DiagnosisCodes
19. ClinicalImpression.finding.itemReference
TypeReference(Observation|ehealth-condition|Condition|Media)
20. ClinicalImpression.prognosisReference
TypeReference(RiskAssessment) : {r}
21. ClinicalImpression.note
Control0..?
22. ClinicalImpression.note.authorReference
Control0..1
TypeReference(ehealth-practitioner|ehealth-patient|ehealth-relatedperson)
23. ClinicalImpression.note.authorString
Control0..1
Typestring

Guidance on how to interpret the contents of this table can be found here.

1. ClinicalImpression
Definition

A record of a clinical assessment performed to determine what problem(s) may affect the patient and before planning the treatments or management strategies that are best to manage a patient's condition. Assessments are often 1:1 with a clinical consultation / encounter, but this varies greatly depending on the clinical workflow. This resource is called "ClinicalImpression" rather than "ClinicalAssessment" to avoid confusion with the recording of assessment tools such as Apgar score.

Control0..*
Summaryfalse
InvariantsDefined on this element
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (: text.`div`.exists())
2. ClinicalImpression.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Summarytrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
3. ClinicalImpression.extension
Definition

An Extension

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control10..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on ClinicalImpression.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
4. ClinicalImpression.extension:carePlan
SliceNamecarePlan
Definition

Identifies the CarePlan context in which this particular resource was created.

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(ehealth-clinicalimpression-careplan) (Extension Type: Reference(ehealth-careplan) : {r})
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
5. ClinicalImpression.extension:decisionContext
SliceNamedecisionContext
Definition

Library and relevant resources used for evaluation

Control0..* This element is affected by the following invariants: ele-1
TypeExtension(ehealth-clinicalimpression-decisionContext) (Extension Type: Reference(Parameters) : {r}, {c})
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
6. ClinicalImpression.extension:decision
SliceNamedecision
Definition

Clinical impression decision, 'approved' or 'approved-for-sharing'

Control0..* This element is affected by the following invariants: ele-1
TypeExtension(ehealth-clinicalimpression-decision) (Extension Type: CodeableConcept)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
7. ClinicalImpression.extension:episodeOfCare
SliceNameepisodeOfCare
Definition

The episode(s) of care that establishes the context for this {{title}}.

Control1..1 This element is affected by the following invariants: ele-1
TypeExtension(episodeOfCare) (Extension Type: Reference(EpisodeOfCare))
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
8. ClinicalImpression.extension:findingBasis
SliceNamefindingBasis
Definition

Basis for the overall clinical impression finding of the questionnaire response

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control This element is affected by the following invariants: ele-1
TypeExtension(ehealth-questionnaireresponse-finding-basis) (Complex Extension)
InvariantsDefined on this element
ele-1: (: )
ext-1: (: )
9. ClinicalImpression.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
10. ClinicalImpression.status
Definition

Identifies the workflow status of the assessment.

Control1..1
BindingThe codes SHALL be taken from ClinicalImpressionStatus

The workflow state of a clinical impression.

Typecode
Is Modifiertrue
Summarytrue
Comments

This element is labeled as a modifier because the status contains the code entered-in-error that marks the clinical impression as not currently valid.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. ClinicalImpression.code
Definition

Categorizes the type of clinical assessment performed.

Control10..1
BindingThe codes SHALL be taken from Clinical Impression CodesFor example codes, see (unbound)
TypeCodeableConcept
Summarytrue
Alternate Namestype
Comments

This is present as a place-holder only and may be removed based on feedback/work group opinion.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. ClinicalImpression.subject
Definition

The patient or group of individuals assessed as part of this record.

Control1..1
TypeReference(ehealth-patient|Patient|Group) : {r}
Summarytrue
Requirements

Group is typically for veterinary and/or public health purposes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. ClinicalImpression.assessor
Definition

The clinician performing the assessment.

Control0..1
TypeReference(ehealth-practitioner|Practitioner|PractitionerRole) : {r}
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. ClinicalImpression.previous
Definition

A reference to the last assessment that was conducted on this patient. Assessments are often/usually ongoing in nature; a care provider (practitioner or team) will make new assessments on an ongoing basis as new data arises or the patient's conditions changes.

Control0..1
TypeReference(ehealth-clinicalimpression|ClinicalImpression) : {r}
Summaryfalse
Comments

It is always likely that multiple previous assessments exist for a patient. The point of quoting a previous assessment is that this assessment is relative to it (see resolved).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
15. ClinicalImpression.problem
Definition

A list of the relevant problems/conditions for a patient.

Control0..*
TypeReference(ehealth-condition|AllergyIntolerance|Condition) : {r}
Summarytrue
Comments

e.g. The patient is a pregnant, has congestive heart failure, has an ‎Adenocarcinoma, and is allergic to penicillin.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
16. ClinicalImpression.prognosisReference
Definition

RiskAssessment expressing likely outcome.

Control0..*
TypeReference(RiskAssessment) : {r}
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here.

1. ClinicalImpression
Definition

A record of a clinical assessment performed to determine what problem(s) may affect the patient and before planning the treatments or management strategies that are best to manage a patient's condition. Assessments are often 1:1 with a clinical consultation / encounter, but this varies greatly depending on the clinical workflow. This resource is called "ClinicalImpression" rather than "ClinicalAssessment" to avoid confusion with the recording of assessment tools such as Apgar score.

Control0..*
Summaryfalse
2. ClinicalImpression.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Control0..1
Typeid
Summarytrue
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

3. ClinicalImpression.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Control0..1
TypeMeta
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
4. ClinicalImpression.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Summarytrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
5. ClinicalImpression.language
Definition

The base language in which the resource is written.

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages A human language
Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Summaryfalse
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. ClinicalImpression.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Control0..1
TypeNarrative
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. ClinicalImpression.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Control0..*
TypeResource
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

8. ClinicalImpression.extension
Definition

An Extension

Control1..*
TypeExtension
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on ClinicalImpression.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
9. ClinicalImpression.extension:carePlan
SliceNamecarePlan
Definition

Identifies the CarePlan context in which this particular resource was created.

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(ehealth-clinicalimpression-careplan) (Extension Type: Reference(ehealth-careplan) : {r})
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
10. ClinicalImpression.extension:decisionContext
SliceNamedecisionContext
Definition

Library and relevant resources used for evaluation

Control0..* This element is affected by the following invariants: ele-1
TypeExtension(ehealth-clinicalimpression-decisionContext) (Extension Type: Reference(Parameters) : {r}, {c})
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
11. ClinicalImpression.extension:decision
SliceNamedecision
Definition

Clinical impression decision, 'approved' or 'approved-for-sharing'

Control0..* This element is affected by the following invariants: ele-1
TypeExtension(ehealth-clinicalimpression-decision) (Extension Type: CodeableConcept)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
12. ClinicalImpression.extension:episodeOfCare
SliceNameepisodeOfCare
Definition

The episode(s) of care that establishes the context for this {{title}}.

Control1..1 This element is affected by the following invariants: ele-1
TypeExtension(episodeOfCare) (Extension Type: Reference(EpisodeOfCare))
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
13. ClinicalImpression.extension:findingBasis
SliceNamefindingBasis
Definition

Basis for the overall clinical impression finding of the questionnaire response

Control0..* This element is affected by the following invariants: ele-1
TypeExtension(ehealth-questionnaireresponse-finding-basis) (Complex Extension)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
14. ClinicalImpression.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
15. ClinicalImpression.identifier
Definition

Business identifiers assigned to this clinical impression by the performer or other systems which remain constant as the resource is updated and propagates from server to server.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Summarytrue
Requirements

Allows identification of the clinical impression as it is known by various participating systems and in a way that remains consistent across servers.

Comments

This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
16. ClinicalImpression.status
Definition

Identifies the workflow status of the assessment.

Control1..1
BindingThe codes SHALL be taken from ClinicalImpressionStatus The workflow state of a clinical impression
Typecode
Is Modifiertrue
Summarytrue
Comments

This element is labeled as a modifier because the status contains the code entered-in-error that marks the clinical impression as not currently valid.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
17. ClinicalImpression.statusReason
Definition

Captures the reason for the current state of the ClinicalImpression.

Control0..1
Binding

Codes identifying the reason for the current state of a clinical impression.

TypeCodeableConcept
Summaryfalse
Alternate NamesSuspended Reason, Cancelled Reason
Comments

This is generally only used for "exception" statuses such as "not-done", "suspended" or "cancelled".

[distinct reason codes for different statuses can be enforced using invariants if they are universal bindings].

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
18. ClinicalImpression.code
Definition

Categorizes the type of clinical assessment performed.

Control1..1
BindingThe codes SHALL be taken from Clinical Impression Codes
TypeCodeableConcept
Summarytrue
Alternate Namestype
Comments

This is present as a place-holder only and may be removed based on feedback/work group opinion.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
19. ClinicalImpression.description
Definition

A summary of the context and/or cause of the assessment - why / where it was performed, and what patient events/status prompted it.

Control0..1
Typestring
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
20. ClinicalImpression.subject
Definition

The patient or group of individuals assessed as part of this record.

Control1..1
TypeReference(ehealth-patient) : {r}
Summarytrue
Requirements

Group is typically for veterinary and/or public health purposes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
21. ClinicalImpression.encounter
Definition

The Encounter during which this ClinicalImpression was created or to which the creation of this record is tightly associated.

Control0..1
TypeReference(Encounter)
Summarytrue
Comments

This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
22. ClinicalImpression.effective[x]
Definition

The point in time or period over which the subject was assessed.

Control0..1
TypeChoice of: dateTime, Period
[x] NoteSee Choice of Data Types for further information about how to use [x]
Summarytrue
Comments

This SHOULD be accurate to at least the minute, though some assessments only have a known date.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
23. ClinicalImpression.date
Definition

Indicates when the documentation of the assessment was complete.

Control0..1
TypedateTime
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
24. ClinicalImpression.assessor
Definition

The clinician performing the assessment.

Control0..1
TypeReference(ehealth-practitioner) : {r}
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
25. ClinicalImpression.previous
Definition

A reference to the last assessment that was conducted on this patient. Assessments are often/usually ongoing in nature; a care provider (practitioner or team) will make new assessments on an ongoing basis as new data arises or the patient's conditions changes.

Control0..1
TypeReference(ehealth-clinicalimpression) : {r}
Summaryfalse
Comments

It is always likely that multiple previous assessments exist for a patient. The point of quoting a previous assessment is that this assessment is relative to it (see resolved).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
26. ClinicalImpression.problem
Definition

A list of the relevant problems/conditions for a patient.

Control0..*
TypeReference(ehealth-condition|AllergyIntolerance) : {r}
Summarytrue
Comments

e.g. The patient is a pregnant, has congestive heart failure, has an ‎Adenocarcinoma, and is allergic to penicillin.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
27. ClinicalImpression.investigation
Definition

One or more sets of investigations (signs, symptoms, etc.). The actual grouping of investigations varies greatly depending on the type and context of the assessment. These investigations may include data generated during the assessment process, or data previously generated and recorded that is pertinent to the outcomes.

Control0..*
TypeBackboneElement
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
28. ClinicalImpression.investigation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
29. ClinicalImpression.investigation.extension
Definition

An Extension

Control0..*
TypeExtension
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on ClinicalImpression.investigation.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
30. ClinicalImpression.investigation.extension:viewInvestigationItem
SliceNameviewInvestigationItem
Definition

Investigation item for View resources so they can be approved.

Control0..* This element is affected by the following invariants: ele-1
TypeExtension(ehealth-clinicalimpression-viewInvestigationItem) (Extension Type: Reference(ehealth-view) : {r})
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
31. ClinicalImpression.investigation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
32. ClinicalImpression.investigation.code
Definition

A name/code for the group ("set") of investigations. Typically, this will be something like "signs", "symptoms", "clinical", "diagnostic", but the list is not constrained, and others such groups such as (exposure|family|travel|nutritional) history may be used.

Control1..1
BindingFor example codes, see InvestigationType A name/code for a set of investigations
TypeCodeableConcept
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
33. ClinicalImpression.investigation.item
Definition

A record of a specific investigation that was undertaken.

Control0..*
TypeReference(ehealth-media|ehealth-observation|ehealth-questionnaireresponse|FamilyMemberHistory|DiagnosticReport|RiskAssessment|ImagingStudy) : {r}
Summaryfalse
Comments

Most investigations are observations of one kind or another but some other specific types of data collection resources can also be used.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
34. ClinicalImpression.protocol
Definition

Reference to a specific published clinical protocol that was followed during this assessment, and/or that provides evidence in support of the diagnosis.

Control0..*
Typeuri
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
35. ClinicalImpression.summary
Definition

A text summary of the investigations and the diagnosis.

Control0..1
Typestring
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
36. ClinicalImpression.finding
Definition

Specific findings or diagnoses that were considered likely or relevant to ongoing treatment.

Control0..*
TypeBackboneElement
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
37. ClinicalImpression.finding.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
38. ClinicalImpression.finding.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
39. ClinicalImpression.finding.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
40. ClinicalImpression.finding.itemCodeableConcept
Definition

Specific text or code for finding or diagnosis, which may include ruled-out or resolved conditions.

Control0..1
BindingThe codes SHALL be taken from ClinicalImpression Finding Codes
TypeCodeableConcept
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
41. ClinicalImpression.finding.itemReference
Definition

Specific reference for finding or diagnosis, which may include ruled-out or resolved conditions.

Control0..1
TypeReference(Observation|ehealth-condition)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
42. ClinicalImpression.finding.basis
Definition

Which investigations support finding or diagnosis.

Control0..1
Typestring
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
43. ClinicalImpression.prognosisCodeableConcept
Definition

Estimate of likely outcome.

Control0..*
BindingFor example codes, see ClinicalImpressionPrognosis Prognosis or outlook findings
TypeCodeableConcept
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
44. ClinicalImpression.prognosisReference
Definition

RiskAssessment expressing likely outcome.

Control0..*
TypeReference(RiskAssessment) : {r}
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
45. ClinicalImpression.supportingInfo
Definition

Information supporting the clinical impression.

Control0..*
TypeReference(Resource)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
46. ClinicalImpression.note
Definition

Commentary about the impression, typically recorded after the impression itself was made, though supplemental notes by the original author could also appear.

Control0..*
TypeAnnotation
Summaryfalse
Comments

Don't use this element for content that should more properly appear as one of the specific elements of the impression.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
47. ClinicalImpression.note.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
48. ClinicalImpression.note.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on ClinicalImpression.note.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
49. ClinicalImpression.note.author[x]
Definition

The individual responsible for making the annotation.

Control0..1
TypeChoice of: Reference(Practitioner|Patient|RelatedPerson|Organization), string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Summarytrue
Comments

Organization is used when there's no need for specific attribution as to who made the comment.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on ClinicalImpression.note.author[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
50. ClinicalImpression.note.author[x]:authorReference
SliceNameauthorReference
Definition

The individual responsible for making the annotation.

Control0..1
TypeReference(ehealth-practitioner|ehealth-patient|ehealth-relatedperson)
[x] NoteSee Choice of Data Types for further information about how to use [x]
Summarytrue
Comments

Organization is used when there's no need for specific attribution as to who made the comment.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
51. ClinicalImpression.note.author[x]:authorString
SliceNameauthorString
Definition

The individual responsible for making the annotation.

Control0..1
Typestring
[x] NoteSee Choice of Data Types for further information about how to use [x]
Summarytrue
Comments

Organization is used when there's no need for specific attribution as to who made the comment.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
52. ClinicalImpression.note.time
Definition

Indicates when this particular annotation was made.

Control0..1
TypedateTime
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
53. ClinicalImpression.note.text
Definition

The text of the annotation in markdown format.

Control1..1
Typemarkdown
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))