eHealth Infrastructure (v2020.2)

StructureDefinition: ehealth-observation

Introduction

An Observation contains the result of a measurement performed by the Patient. It is based on a ProcedureRequest that contains information about what to measure and when to measure.

In addition to the result and context, the Observation also contains information about the device used to perform the measurement and reference ranges copied from the ProcedureRequest. Reference ranges can change over time, so the copy ensures that the reference range at the time of measurement is preserved.

The eHealth Infrastructure will assist in calculating qualities of the measurement. The observation will be annotated with these qualities.

Scope and Usage

In the eHealth Infrastructure the Observation resource is used in conjunction with the following resources.

  • Media
    • Some Observations may be accompanied by media. E.g. images.
  • QuestionnaireResponse
    • Some activities may involve answering a Questionnaire. The answer is captured in a QuestionnaireResponse. Questionnaires can be used for standalone information about the health of the patient, or they can be used to provide context information for Observations.
  • Communication
    • Communication resources can be used to annotate Observations. See the profile ehealth-communication for further details.
  • Provenance
    • In certain circumstances data from Observations and QuestionnaireResponses can be reused. When this happens, a Provenance resource will identify the source of the original data.
    • Provenance is also used to link correlated resources submitted together.

Submitting Observation bundles

Observations can be submitted using the submit-measurement operation. It is possible to submit a bundle of related resources containing:

  • Observations
  • Media
  • QuestionnaireResponses
  • Provenances

The submit-measurement operation is intended for uploading single measurements, not bulk uploads. Uploading large batches of resources is considered misuse.

The entire bundle is validated and then saved in a single transaction.

Observations are generally immutable once the bundle is saved. Further information about the observation can be added in separate resources like Provenance and Communication.

Marking Observations as “reused”

When a submitted Observation is actually reuse of a previous measurement, this must be marked by the submitter by added a Provenance resource with certain pre-defined properties.

  • Provenance
    • .target must reference all reused resources in the submitted bundle; e.g. the Observation, QuestionnaireResponse or Media containing a copy of the reused values.
    • .activity must have value “Quotation” (“wasQuotedFrom”) from FHIR ValueSet https://www.hl7.org/fhir/stu3/codesystem-w3c-provenance-activity-type.html#w3c-provenance-activity-type-Quotation
    • .policy must have value “http://ehealth.sundhed.dk/policy/ehealth/reuse-by-patient”
    • .agent.whoReference must reference the Patient who decided to reuse
    • .entity.role = “quotation”
    • .entity.what = must be reference to Observation, QuestionnaireResponse or Media being reused.

The Provenance resource needs not be supplied for resources which are not being used. However, for non-reused resources, a Provenance resource with .activity = “Primary-Source” can be used to indicate a newly obtained (not reused) Observation, QuestionnaireResponse or Media.

Marking Resources submitted in same bundle

When an Observation-bundle is submitted the eHealth Infrastructure will automatically create a Provenance resource, which identifies the resources which were submitted in the same bundle.

The search-measurements operation can return the resources submitted as part of the same bundle.

Searching for Observations

It is possible to search for Observations based on:

  • context
  • subject
  • code
  • period
  • deviceMeasuringQuality
  • situationQuality
  • operationQuality

At least one of “subject” and “context” must be provided. “period” searches on range of “effective”.

See Searching for more information about searching in REST, messaging, and services.

Formal Views of Profile Content

The official URL for this profile is: 

http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-observation

This profile builds on Observation.

This profile was published on Tue Mar 31 08:26:16 UTC 2020 as a draft by ehealth.sundhed.dk.

Description of Profiles, Differentials, Snapshots, and how the XML and JSON presentations work.

This structure is derived from Observation

NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation 0..*ObservationMeasurements and simple assertions made about a patient, device or other subject.
... extension 0..*ExtensionSlice: Unordered, Open by value:url
... ehealth-quality 0..*(Complex)Minimum requirements for qualities
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-quality
... basedOn 1..1Reference(eHealth ProcedureRequest) {r}Fulfills procedure request.
... code 1..1CodeableConceptBinding: Observation Codes (required)
... subject 1..1Reference(eHealth Patient) {r}
... context 1..1Reference(Encounter | eHealth EpisodeOfCare) {r}
... effective[x] 1..1dateTime, Period
... performer 1..1Reference(eHealth Practitioner | eHealth Organization | eHealth Patient | eHealth RelatedPerson) {r}
... value[x] 0..1
.... valueQuantityQuantity
.... valueCodeableConceptCodeableConcept
... specimen 0..1Reference(Specimen) {r}
... device 0..1Reference(eHealth Device) {r}
... referenceRange 0..*BackboneElement
.... low 0..1SimpleQuantity
.... high 0..1SimpleQuantity
.... type 0..1CodeableConceptBinding: Reference Range Type (extensible)
... related
.... target 1..1Reference(eHealth Observation | eHealth QuestionnaireResponse | Sequence) {r}
... component
.... code 1..1CodeableConceptBinding: Observation Codes (required)
.... value[x] 0..1
..... valueQuantityQuantity
..... valueCodeableConceptCodeableConcept

doco Documentation for this format

This structure is derived from Observation

NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation I0..*ObservationMeasurements and simple assertions made about a patient, device or other subject.
... id Σ0..1idLogical id of this artifact
... meta Σ0..1MetaMetadata about the resource
... implicitRules ?!Σ0..1uriA set of rules under which this content was created
... language 0..1codeLanguage of the resource content
Binding: Common Languages (extensible)
Max Binding: All Languages
... text I0..1NarrativeText summary of the resource, for human interpretation
... contained 0..*ResourceContained, inline Resources
... extension 0..*ExtensionExtension
Slice: Unordered, Open by value:url
... ehealth-quality I0..*(Complex)Minimum requirements for qualities
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-quality
... modifierExtension ?!0..*ExtensionExtensions that cannot be ignored
... identifier Σ0..*IdentifierBusiness Identifier for observation
... basedOn Σ1..1Reference(eHealth ProcedureRequest) {r}Fulfills procedure request.
... status ?!Σ1..1coderegistered | preliminary | final | amended +
Binding: ObservationStatus (required)
... category 0..*CodeableConceptClassification of type of observation
Binding: Observation Category Codes (preferred)
... code Σ1..1CodeableConceptType of observation (code / type)
Binding: Observation Codes (required)
... subject Σ1..1Reference(eHealth Patient) {r}Who and/or what this is about
... context 1..1Reference(Encounter | eHealth EpisodeOfCare) {r}Healthcare event during which this observation is made
... effective[x] Σ1..1Clinically relevant time/time-period for observation
.... effectiveDateTimedateTime
.... effectivePeriodPeriod
... issued Σ0..1instantDate/Time this was made available
... performer Σ1..1Reference(eHealth Practitioner | eHealth Organization | eHealth Patient | eHealth RelatedPerson) {r}Who is responsible for the observation
... value[x] ΣI0..1Actual result
.... valueQuantityQuantity
.... valueCodeableConceptCodeableConcept
... dataAbsentReason I0..1CodeableConceptWhy the result is missing
Binding: Observation Value Absent Reason (extensible)
... interpretation 0..1CodeableConceptHigh, low, normal, etc.
Binding: Observation Interpretation Codes (extensible)
... comment 0..1stringComments about result
... bodySite 0..1CodeableConceptObserved body part
Binding: SNOMED CT Body Structures (example)
... method 0..1CodeableConceptHow it was done
Binding: Observation Methods (example)
... specimen 0..1Reference(Specimen) {r}Specimen used for this observation
... device 0..1Reference(eHealth Device) {r}(Measurement) Device
... referenceRange I0..*BackboneElementProvides guide for interpretation
.... id 0..1stringxml:id (or equivalent in JSON)
.... extension 0..*ExtensionAdditional Content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored
.... low I0..1SimpleQuantityLow Range, if relevant
.... high I0..1SimpleQuantityHigh Range, if relevant
.... type 0..1CodeableConceptReference range qualifier
Binding: Reference Range Type (extensible)
.... appliesTo 0..*CodeableConceptReference range population
Binding: Observation Reference Range Applies To Codes (example)
.... age 0..1RangeApplicable age range, if relevant
.... text 0..1stringText based reference range in an observation
... related ΣI0..*BackboneElementResource related to this observation
.... id 0..1stringxml:id (or equivalent in JSON)
.... extension 0..*ExtensionAdditional Content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored
.... type 0..1codehas-member | derived-from | sequel-to | replaces | qualified-by | interfered-by
Binding: ObservationRelationshipType (required)
.... target 1..1Reference(eHealth Observation | eHealth QuestionnaireResponse | Sequence) {r}Resource that is related to this one
... component ΣI0..*BackboneElementComponent results
.... id 0..1stringxml:id (or equivalent in JSON)
.... extension 0..*ExtensionAdditional Content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored
.... code Σ1..1CodeableConceptType of component observation (code / type)
Binding: Observation Codes (required)
.... value[x] Σ0..1Actual component result
..... valueQuantityQuantity
..... valueCodeableConceptCodeableConcept
.... dataAbsentReason I0..1CodeableConceptWhy the component result is missing
Binding: Observation Value Absent Reason (extensible)
.... interpretation 0..1CodeableConceptHigh, low, normal, etc.
Binding: Observation Interpretation Codes (extensible)
.... referenceRange 0..*Unknown reference to #Observation.referenceRange
Provides guide for interpretation of component result

doco Documentation for this format

Differential View

This structure is derived from Observation

NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation 0..*ObservationMeasurements and simple assertions made about a patient, device or other subject.
... extension 0..*ExtensionSlice: Unordered, Open by value:url
... ehealth-quality 0..*(Complex)Minimum requirements for qualities
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-quality
... basedOn 1..1Reference(eHealth ProcedureRequest) {r}Fulfills procedure request.
... code 1..1CodeableConceptBinding: Observation Codes (required)
... subject 1..1Reference(eHealth Patient) {r}
... context 1..1Reference(Encounter | eHealth EpisodeOfCare) {r}
... effective[x] 1..1dateTime, Period
... performer 1..1Reference(eHealth Practitioner | eHealth Organization | eHealth Patient | eHealth RelatedPerson) {r}
... value[x] 0..1
.... valueQuantityQuantity
.... valueCodeableConceptCodeableConcept
... specimen 0..1Reference(Specimen) {r}
... device 0..1Reference(eHealth Device) {r}
... referenceRange 0..*BackboneElement
.... low 0..1SimpleQuantity
.... high 0..1SimpleQuantity
.... type 0..1CodeableConceptBinding: Reference Range Type (extensible)
... related
.... target 1..1Reference(eHealth Observation | eHealth QuestionnaireResponse | Sequence) {r}
... component
.... code 1..1CodeableConceptBinding: Observation Codes (required)
.... value[x] 0..1
..... valueQuantityQuantity
..... valueCodeableConceptCodeableConcept

doco Documentation for this format

Snapshot View

NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation I0..*ObservationMeasurements and simple assertions made about a patient, device or other subject.
... id Σ0..1idLogical id of this artifact
... meta Σ0..1MetaMetadata about the resource
... implicitRules ?!Σ0..1uriA set of rules under which this content was created
... language 0..1codeLanguage of the resource content
Binding: Common Languages (extensible)
Max Binding: All Languages
... text I0..1NarrativeText summary of the resource, for human interpretation
... contained 0..*ResourceContained, inline Resources
... extension 0..*ExtensionExtension
Slice: Unordered, Open by value:url
... ehealth-quality I0..*(Complex)Minimum requirements for qualities
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-quality
... modifierExtension ?!0..*ExtensionExtensions that cannot be ignored
... identifier Σ0..*IdentifierBusiness Identifier for observation
... basedOn Σ1..1Reference(eHealth ProcedureRequest) {r}Fulfills procedure request.
... status ?!Σ1..1coderegistered | preliminary | final | amended +
Binding: ObservationStatus (required)
... category 0..*CodeableConceptClassification of type of observation
Binding: Observation Category Codes (preferred)
... code Σ1..1CodeableConceptType of observation (code / type)
Binding: Observation Codes (required)
... subject Σ1..1Reference(eHealth Patient) {r}Who and/or what this is about
... context 1..1Reference(Encounter | eHealth EpisodeOfCare) {r}Healthcare event during which this observation is made
... effective[x] Σ1..1Clinically relevant time/time-period for observation
.... effectiveDateTimedateTime
.... effectivePeriodPeriod
... issued Σ0..1instantDate/Time this was made available
... performer Σ1..1Reference(eHealth Practitioner | eHealth Organization | eHealth Patient | eHealth RelatedPerson) {r}Who is responsible for the observation
... value[x] ΣI0..1Actual result
.... valueQuantityQuantity
.... valueCodeableConceptCodeableConcept
... dataAbsentReason I0..1CodeableConceptWhy the result is missing
Binding: Observation Value Absent Reason (extensible)
... interpretation 0..1CodeableConceptHigh, low, normal, etc.
Binding: Observation Interpretation Codes (extensible)
... comment 0..1stringComments about result
... bodySite 0..1CodeableConceptObserved body part
Binding: SNOMED CT Body Structures (example)
... method 0..1CodeableConceptHow it was done
Binding: Observation Methods (example)
... specimen 0..1Reference(Specimen) {r}Specimen used for this observation
... device 0..1Reference(eHealth Device) {r}(Measurement) Device
... referenceRange I0..*BackboneElementProvides guide for interpretation
.... id 0..1stringxml:id (or equivalent in JSON)
.... extension 0..*ExtensionAdditional Content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored
.... low I0..1SimpleQuantityLow Range, if relevant
.... high I0..1SimpleQuantityHigh Range, if relevant
.... type 0..1CodeableConceptReference range qualifier
Binding: Reference Range Type (extensible)
.... appliesTo 0..*CodeableConceptReference range population
Binding: Observation Reference Range Applies To Codes (example)
.... age 0..1RangeApplicable age range, if relevant
.... text 0..1stringText based reference range in an observation
... related ΣI0..*BackboneElementResource related to this observation
.... id 0..1stringxml:id (or equivalent in JSON)
.... extension 0..*ExtensionAdditional Content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored
.... type 0..1codehas-member | derived-from | sequel-to | replaces | qualified-by | interfered-by
Binding: ObservationRelationshipType (required)
.... target 1..1Reference(eHealth Observation | eHealth QuestionnaireResponse | Sequence) {r}Resource that is related to this one
... component ΣI0..*BackboneElementComponent results
.... id 0..1stringxml:id (or equivalent in JSON)
.... extension 0..*ExtensionAdditional Content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored
.... code Σ1..1CodeableConceptType of component observation (code / type)
Binding: Observation Codes (required)
.... value[x] Σ0..1Actual component result
..... valueQuantityQuantity
..... valueCodeableConceptCodeableConcept
.... dataAbsentReason I0..1CodeableConceptWhy the component result is missing
Binding: Observation Value Absent Reason (extensible)
.... interpretation 0..1CodeableConceptHigh, low, normal, etc.
Binding: Observation Interpretation Codes (extensible)
.... referenceRange 0..*Unknown reference to #Observation.referenceRange
Provides guide for interpretation of component result

doco Documentation for this format

 

Terminology Bindings

PathConformanceValueSet
Observation.languageextensibleCommon Languages
Max Binding: All Languages
Observation.statusrequiredObservationStatus
Observation.categorypreferredObservation Category Codes
Observation.coderequiredObservationCodes
Observation.dataAbsentReasonextensibleObservation Value Absent Reason
Observation.interpretationextensibleObservation Interpretation Codes
Observation.bodySiteexampleSNOMED CT Body Structures
Observation.methodexampleObservation Methods
Observation.referenceRange.typeextensibleReferenceRangeType
Observation.referenceRange.appliesToexampleObservation Reference Range Applies To Codes
Observation.related.typerequiredObservationRelationshipType
Observation.component.coderequiredObservationCodes
Observation.component.dataAbsentReasonextensibleObservation Value Absent Reason
Observation.component.interpretationextensibleObservation Interpretation Codes

Constraints

IdPathDetailsRequirements
dom-2ObservationIf the resource is contained in another resource, it SHALL NOT contain nested Resources
: contained.contained.empty()
dom-1ObservationIf the resource is contained in another resource, it SHALL NOT contain any narrative
: contained.text.empty()
dom-4ObservationIf a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-3ObservationIf the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource
: contained.where(('#'+id in %resource.descendants().reference).not()).empty()
obs-7ObservationIf code is the same as a component code then the value element associated with the code SHALL NOT be present
: value.empty() or component.code.where( (coding.code = %resource.code.coding.code) and (coding.system = %resource.code.coding.system)).empty()
obs-6ObservationdataAbsentReason SHALL only be present if Observation.value[x] is not present
: dataAbsentReason.empty() or value.empty()
ele-1Observation.extension:qualityAll FHIR elements must have a @value or children
: hasValue() | (children().count() > id.count())
ext-1Observation.extension:qualityMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Observation.referenceRangeAll FHIR elements must have a @value or children
: hasValue() | (children().count() > id.count())
obs-3Observation.referenceRangeMust have at least a low or a high or text
: low.exists() or high.exists() or text.exists()
ele-1Observation.relatedAll FHIR elements must have a @value or children
: hasValue() | (children().count() > id.count())
ele-1Observation.componentAll FHIR elements must have a @value or children
: hasValue() | (children().count() > id.count())
.