eHealth Infrastructure
3.0.0 - release

eHealth Infrastructure - Local Development build (v3.0.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: ehealth-library - Detailed Descriptions

Active as of 2024-05-16

Definitions for the ehealth-library resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Library
2. Library.extension
Control2..?
SlicingThis element introduces a set of slices on Library.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
4. Library.extension:intendedAudience
Slice NameintendedAudience
Control0..*
TypeExtension(Intended audience) (Extension Type: Reference(ehealth-organization)referenced)
6. Library.extension:revision
Slice Namerevision
Control1..1
TypeExtension(Revision) (Extension Type: string)
8. Library.extension:modifierRole
Slice NamemodifierRole
Control1..1
TypeExtension(Modified role) (Complex Extension)
10. Library.version
NoteThis is a business versionId, not a resource version id (see discussion)
Control1..?
12. Library.type
BindingThe codes SHALL be taken from Library Type
(required to http://ehealth.sundhed.dk/vs/library-type
14. Library.useContext
16. Library.useContext.code
BindingThe codes SHALL be taken from http://ehealth.sundhed.dk/vs/usage-context-type
(required to http://ehealth.sundhed.dk/vs/usage-context-type
18. Library.jurisdiction
BindingThe codes SHALL be taken from Jurisdiction
(required to http://ehealth.sundhed.dk/vs/jurisdiction
20. Library.parameter
Control1..?

Guidance on how to interpret the contents of this table can be found here

0. Library
Definition

The Library resource is a general-purpose container for knowledge asset definitions. It can be used to describe and expose existing knowledge assets such as logic libraries and information model descriptions, as well as to describe a collection of knowledge assets.

ShortRepresents a library of quality improvement components
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
lib-0: Name should be usable as an identifier for the module by machine processing applications such as code generation (name.matches('[A-Z]([A-Za-z0-9_]){0,254}'))
lib-0: Name should be usable as an identifier for the module by machine processing applications such as code generation (name.matches('[A-Z]([A-Za-z0-9_]){0,254}'))
2. Library.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Library.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control20..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Library.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
6. Library.extension:intendedAudience
Slice NameintendedAudience
Definition

Specifies that the resource is only intended for use in the specified organisations. Leave blank if the resource is intended for global use.

ShortThe intended audience of the resource
Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(Intended audience) (Extension Type: Reference(ehealth-organization)referenced)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Library.extension:revision
Slice Namerevision
Definition

Business revision of the resource

ShortBusiness revision
Control1..1
This element is affected by the following invariants: ele-1
TypeExtension(Revision) (Extension Type: string)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. Library.extension:modifierRole
Slice NamemodifierRole
Definition

This is a modifier role that can hold a role and a reference to the item who has the role. Ex. owner + a reference to the owner organization.

ShortModifier role
Control1..1
This element is affected by the following invariants: ele-1
TypeExtension(Modified role) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Library.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Library.version
Definition

The identifier that is used to identify this version of the library when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the library author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence. To provide a version consistent with the Decision Support Service specification, use the format Major.Minor.Revision (e.g. 1.0.0). For more information on versioning knowledge assets, refer to the Decision Support Service specification. Note that a version is required for non-experimental active artifacts.

ShortBusiness version of the library
Comments

There may be different library instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the library with the format [url]|[version].

NoteThis is a business versionId, not a resource version id (see discussion)
Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Library.status
Definition

The status of this library. Enables tracking the life-cycle of the content.

Shortdraft | active | retired | unknown
Comments

Allows filtering of libraries that are appropriate for use vs. not.

Control1..1
BindingThe codes SHALL be taken from PublicationStatushttp://hl7.org/fhir/ValueSet/publication-status|4.0.1
(required to http://hl7.org/fhir/ValueSet/publication-status|4.0.1
Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not use a retired {{title}} without due consideration
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Library.type
Definition

Identifies the type of library such as a Logic Library, Model Definition, Asset Collection, or Module Definition.

Shortlogic-library | model-definition | asset-collection | module-definition
Control1..1
BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from Library Typehttp://hl7.org/fhir/ValueSet/library-type
(required to http://ehealth.sundhed.dk/vs/library-type
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Library.jurisdiction
Definition

A legal or geographic region in which the library is intended to be used.

ShortIntended jurisdiction for library (if applicable)
Comments

It may be possible for the library to be used in jurisdictions other than those for which it was originally designed or intended.

Control0..*
BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from Jurisdictionhttp://hl7.org/fhir/ValueSet/jurisdiction
(required to http://ehealth.sundhed.dk/vs/jurisdiction
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Library.parameter
Definition

The parameter element defines parameters used by the library.

ShortParameters defined by the library
Control10..*
TypeParameterDefinition
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Library
Definition

The Library resource is a general-purpose container for knowledge asset definitions. It can be used to describe and expose existing knowledge assets such as logic libraries and information model descriptions, as well as to describe a collection of knowledge assets.

ShortRepresents a library of quality improvement components
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
lib-0: Name should be usable as an identifier for the module by machine processing applications such as code generation (name.matches('[A-Z]([A-Za-z0-9_]){0,254}'))
2. Library.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. Library.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Library.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Library.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Library.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Library.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control0..*
TypeResource
Is Modifierfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. Library.extension
Definition

An Extension

ShortExtension
Control2..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Library.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
16. Library.extension:intendedAudience
Slice NameintendedAudience
Definition

Specifies that the resource is only intended for use in the specified organisations. Leave blank if the resource is intended for global use.

ShortThe intended audience of the resource
Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(Intended audience) (Extension Type: Reference(ehealth-organization)referenced)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Library.extension:revision
Slice Namerevision
Definition

Business revision of the resource

ShortBusiness revision
Control1..1
This element is affected by the following invariants: ele-1
TypeExtension(Revision) (Extension Type: string)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. Library.extension:modifierRole
Slice NamemodifierRole
Definition

This is a modifier role that can hold a role and a reference to the item who has the role. Ex. owner + a reference to the owner organization.

ShortModifier role
Control1..1
This element is affected by the following invariants: ele-1
TypeExtension(Modified role) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. Library.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
24. Library.url
Definition

An absolute URI that is used to identify this library when it is referenced in a specification, model, design or an instance; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which at which an authoritative instance of this library is (or will be) published. This URL can be the target of a canonical reference. It SHALL remain the same when the library is stored on different servers.

ShortCanonical identifier for this library, represented as a URI (globally unique)
Comments

Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.

The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in Technical and Business Versions.

In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found.

Control0..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the library to be referenced by a single globally unique identifier.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Library.identifier
Definition

A formal identifier that is used to identify this library when it is represented in other formats, or referenced in a specification, model, design or an instance. e.g. CMS or NQF identifiers for a measure artifact. Note that at least one identifier is required for non-experimental active artifacts.

ShortAdditional identifier for the library
Comments

Typically, this is used for identifiers that can go in an HL7 V3 II (instance identifier) data type, and can then identify this library outside of FHIR, where it is not possible to use the logical URI.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Summarytrue
Requirements

Allows externally provided and/or usable business identifiers to be easily associated with the module.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Library.version
Definition

The identifier that is used to identify this version of the library when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the library author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence. To provide a version consistent with the Decision Support Service specification, use the format Major.Minor.Revision (e.g. 1.0.0). For more information on versioning knowledge assets, refer to the Decision Support Service specification. Note that a version is required for non-experimental active artifacts.

ShortBusiness version of the library
Comments

There may be different library instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the library with the format [url]|[version].

NoteThis is a business versionId, not a resource version id (see discussion)
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Library.name
Definition

A natural language name identifying the library. This name should be usable as an identifier for the module by machine processing applications such as code generation.

ShortName for this library (computer friendly)
Comments

The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

Control0..1
This element is affected by the following invariants: inv-0
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Support human navigation and code generation.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Library.title
Definition

A short, descriptive, user-friendly title for the library.

ShortName for this library (human friendly)
Comments

This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Library.subtitle
Definition

An explanatory or alternate title for the library giving additional information about its content.

ShortSubordinate title of the library
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Library.status
Definition

The status of this library. Enables tracking the life-cycle of the content.

Shortdraft | active | retired | unknown
Comments

Allows filtering of libraries that are appropriate for use vs. not.

Control1..1
BindingThe codes SHALL be taken from PublicationStatus
(required to http://hl7.org/fhir/ValueSet/publication-status|4.0.1
Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not use a retired {{title}} without due consideration
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Library.experimental
Definition

A Boolean value to indicate that this library is authored for testing purposes (or education/evaluation/marketing) and is not intended to be used for genuine usage.

ShortFor testing purposes, not real usage
Comments

Allows filtering of librarys that are appropriate for use versus not.

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Enables experimental content to be developed following the same lifecycle that would be used for a production-level library.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Library.type
Definition

Identifies the type of library such as a Logic Library, Model Definition, Asset Collection, or Module Definition.

Shortlogic-library | model-definition | asset-collection | module-definition
Control1..1
BindingThe codes SHALL be taken from Library Type
(required to http://ehealth.sundhed.dk/vs/library-type
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Library.subject[x]
Definition

A code or group definition that describes the intended subject of the contents of the library.

ShortType of individual the library content is focused on
Control0..1
BindingUnless not suitable, these codes SHALL be taken from SubjectType
(extensible to http://hl7.org/fhir/ValueSet/subject-type
TypeChoice of: CodeableConcept, Reference(Group)
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summaryfalse
Meaning if MissingPatient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Library.date
Definition

The date (and optionally time) when the library was published. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the library changes.

ShortDate last changed
Comments

Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the library. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

Control0..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate NamesRevision Date
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Library.publisher
Definition

The name of the organization or individual that published the library.

ShortName of the publisher (organization or individual)
Comments

Usually an organization but may be an individual. The publisher (or steward) of the library is the organization or individual primarily responsible for the maintenance and upkeep of the library. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the library. This item SHOULD be populated unless the information is available from context.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Helps establish the "authority/credibility" of the library. May also allow for contact.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Library.contact
Definition

Contact details to assist a user in finding and communicating with the publisher.

ShortContact details for the publisher
Comments

May be a web site, an email address, a telephone number, etc.

Control0..*
TypeContactDetail
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Library.description
Definition

A free text natural language description of the library from a consumer's perspective.

ShortNatural language description of the library
Comments

This description can be used to capture details such as why the library was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the library as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the library is presumed to be the predominant language in the place the library was created).

Control0..1
Typemarkdown
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Library.useContext
Definition

The content was developed with a focus and intent of supporting the contexts that are listed. These contexts may be general categories (gender, age, ...) or may be references to specific programs (insurance plans, studies, ...) and may be used to assist with indexing and searching for appropriate library instances.

ShortThe context that the content is intended to support
Comments

When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

Control0..*
TypeUsageContext
Is Modifierfalse
Summarytrue
Requirements

Assist in searching for appropriate content.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Library.useContext.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
56. Library.useContext.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Library.useContext.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
58. Library.useContext.code
Definition

A code that identifies the type of context being specified by this usage context.

ShortType of context being specified
Control1..1
BindingThe codes SHALL be taken from http://ehealth.sundhed.dk/vs/usage-context-type
(required to http://ehealth.sundhed.dk/vs/usage-context-type
TypeCoding
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. Library.useContext.value[x]
Definition

A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.

ShortValue that defines the context
Control1..1
BindingFor example codes, see Context of Use ValueSet
(example to http://hl7.org/fhir/ValueSet/use-context
TypeChoice of: CodeableConcept, Quantity, Range, Reference(PlanDefinition, ResearchStudy, InsurancePlan, HealthcareService, Group, Location, Organization)
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. Library.jurisdiction
Definition

A legal or geographic region in which the library is intended to be used.

ShortIntended jurisdiction for library (if applicable)
Comments

It may be possible for the library to be used in jurisdictions other than those for which it was originally designed or intended.

Control0..*
BindingThe codes SHALL be taken from Jurisdiction
(required to http://ehealth.sundhed.dk/vs/jurisdiction
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. Library.purpose
Definition

Explanation of why this library is needed and why it has been designed as it has.

ShortWhy this library is defined
Comments

This element does not describe the usage of the library. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this library.

Control0..1
Typemarkdown
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. Library.usage
Definition

A detailed description of how the library is used from a clinical perspective.

ShortDescribes the clinical usage of the library
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Library.copyright
Definition

A copyright statement relating to the library and/or its contents. Copyright statements are generally legal restrictions on the use and publishing of the library.

ShortUse and/or publishing restrictions
Control0..1
Typemarkdown
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Consumers must be able to determine any legal restrictions on the use of the library and/or its content.

Alternate NamesLicense, Restrictions
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Library.approvalDate
Definition

The date on which the resource content was approved by the publisher. Approval happens once when the content is officially approved for usage.

ShortWhen the library was approved by publisher
Comments

The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.

Control0..1
Typedate
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. Library.lastReviewDate
Definition

The date on which the resource content was last reviewed. Review happens periodically after approval but does not change the original approval date.

ShortWhen the library was last reviewed
Comments

If specified, this date follows the original approval date.

Control0..1
Typedate
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Gives a sense of how "current" the content is. Resources that have not been reviewed in a long time may have a risk of being less appropriate/relevant.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Library.effectivePeriod
Definition

The period during which the library content was or is planned to be in active use.

ShortWhen the library is expected to be used
Comments

The effective period for a library determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015.

Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Requirements

Allows establishing a transition before a resource comes into effect and also allows for a sunsetting process when new versions of the library are or are expected to be used instead.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. Library.topic
Definition

Descriptive topics related to the content of the library. Topics provide a high-level categorization of the library that can be useful for filtering and searching.

ShortE.g. Education, Treatment, Assessment, etc.
Control0..*
BindingFor example codes, see DefinitionTopic
(example to http://hl7.org/fhir/ValueSet/definition-topic
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Repositories must be able to determine how to categorize the library so that it can be found by topical searches.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
78. Library.author
Definition

An individiual or organization primarily involved in the creation and maintenance of the content.

ShortWho authored the content
Control0..*
TypeContactDetail
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
80. Library.editor
Definition

An individual or organization primarily responsible for internal coherence of the content.

ShortWho edited the content
Control0..*
TypeContactDetail
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
82. Library.reviewer
Definition

An individual or organization primarily responsible for review of some aspect of the content.

ShortWho reviewed the content
Control0..*
TypeContactDetail
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. Library.endorser
Definition

An individual or organization responsible for officially endorsing the content for use in some setting.

ShortWho endorsed the content
Control0..*
TypeContactDetail
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. Library.relatedArtifact
Definition

Related artifacts such as additional documentation, justification, or bibliographic references.

ShortAdditional documentation, citations, etc.
Comments

Each related artifact is either an attachment, or a reference to another resource, but not both.

Control0..*
TypeRelatedArtifact
Is Modifierfalse
Summaryfalse
Requirements

Libraries must be able to provide enough information for consumers of the content (and/or interventions or results produced by the content) to be able to determine and understand the justification for and evidence in support of the content.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. Library.parameter
Definition

The parameter element defines parameters used by the library.

ShortParameters defined by the library
Control1..*
TypeParameterDefinition
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. Library.dataRequirement
Definition

Describes a set of data that must be provided in order to be able to successfully perform the computations defined by the library.

ShortWhat data is referenced by this library
Control0..*
TypeDataRequirement
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. Library.content
Definition

The content of the library as an Attachment. The content may be a reference to a url, or may be directly embedded as a base-64 string. Either way, the contentType of the attachment determines how to interpret the content.

ShortContents of the library, either embedded or referenced
Control0..*
TypeAttachment
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))