eHealth Infrastructure
2.5.0 - release

eHealth Infrastructure - Local Development build (v2.5.0). See the Directory of published versions

Extension: ehealth-resolved-timing - Detailed Descriptions

Active as of 2023-02-09

Definitions for the ehealth-resolved-timing extension.

1. Extension
Definition

Resolved timing reflects whether a measurement (Observation, QuestionnaireResponse or Media) has been performed ad-hoc or as fulfillment of a measurement regime time slot in which case the extent of the time slot is given by start and end. If the measurement regime has a form for which a time slot cannot be resolved or determining is/was not supported, the type unresolved is used.

Optional Extension Element - found in all resources.

2. Extension.extension
Control20..*
3. Extension.extension:serviceRequestVersionId
SliceNameserviceRequestVersionId
Control1..1
4. Extension.extension:serviceRequestVersionId.extension
Control0..0
5. Extension.extension:serviceRequestVersionId.url
Control0..?
Fixed ValueserviceRequestVersionId
6. Extension.extension:serviceRequestVersionId.value[x]
Control1..?
Typeid
[x] NoteSee Choice of Data Types for further information about how to use [x]
SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
7. Extension.extension:serviceRequestVersionId.valueId
Control1..1
8. Extension.extension:start
SliceNamestart
Control0..1
9. Extension.extension:start.extension
Control0..0
10. Extension.extension:start.url
Control0..?
Fixed Valuestart
11. Extension.extension:start.value[x]
Control1..?
TypedateTime
[x] NoteSee Choice of Data Types for further information about how to use [x]
SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
12. Extension.extension:start.valueDateTime
Control1..1
13. Extension.extension:end
SliceNameend
Control0..1
14. Extension.extension:end.extension
Control0..0
15. Extension.extension:end.url
Control0..?
Fixed Valueend
16. Extension.extension:end.value[x]
Control1..?
TypedateTime
[x] NoteSee Choice of Data Types for further information about how to use [x]
SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
17. Extension.extension:end.valueDateTime
Control1..1
18. Extension.extension:type
SliceNametype
Control1..1
19. Extension.extension:type.extension
Control0..0
20. Extension.extension:type.url
Control0..?
Fixed Valuetype
21. Extension.extension:type.value[x]
Control1..?
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
22. Extension.extension:type.valueCodeableConcept
Control1..1
BindingThe codes SHALL be taken from Resolved Timing Type
23. Extension.url
Fixed Valuehttp://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-resolved-timing
24. Extension.value[x]
Control0..01
[x] NoteSee Choice of Data Types for further information about how to use [x]
1. Extension
Definition

Resolved timing reflects whether a measurement (Observation, QuestionnaireResponse or Media) has been performed ad-hoc or as fulfillment of a measurement regime time slot in which case the extent of the time slot is given by start and end. If the measurement regime has a form for which a time slot cannot be resolved or determining is/was not supported, the type unresolved is used.

Optional Extension Element - found in all resources.

Control0..* This element is affected by the following invariants: ele-1
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
2. Extension.extension
Definition

An Extension

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control20..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
3. Extension.extension:serviceRequestVersionId
SliceNameserviceRequestVersionId
Definition

An Extension

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control10..1*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
4. Extension.extension:serviceRequestVersionId.extension
Definition

An Extension

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..0*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
5. Extension.extension:serviceRequestVersionId.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Control1..1
Typeuri
XML RepresentationIn the XML format, this property is represented as an attribute.
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Fixed ValueserviceRequestVersionId
6. Extension.extension:serviceRequestVersionId.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Control10..1
TypeChoice of: id, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
7. Extension.extension:serviceRequestVersionId.value[x]:valueId
SliceNamevalueId
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Control10..1
TypeChoice of: id, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
8. Extension.extension:start
SliceNamestart
Definition

An Extension

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..1*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
9. Extension.extension:start.extension
Definition

An Extension

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..0*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
10. Extension.extension:start.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Control1..1
Typeuri
XML RepresentationIn the XML format, this property is represented as an attribute.
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Fixed Valuestart
11. Extension.extension:start.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Control10..1
TypeChoice of: dateTime, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
12. Extension.extension:start.value[x]:valueDateTime
SliceNamevalueDateTime
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Control10..1
TypeChoice of: dateTime, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. Extension.extension:end
SliceNameend
Definition

An Extension

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..1*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
14. Extension.extension:end.extension
Definition

An Extension

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..0*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
15. Extension.extension:end.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Control1..1
Typeuri
XML RepresentationIn the XML format, this property is represented as an attribute.
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Fixed Valueend
16. Extension.extension:end.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Control10..1
TypeChoice of: dateTime, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
17. Extension.extension:end.value[x]:valueDateTime
SliceNamevalueDateTime
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Control10..1
TypeChoice of: dateTime, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
18. Extension.extension:type
SliceNametype
Definition

An Extension

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control10..1*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
19. Extension.extension:type.extension
Definition

An Extension

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..0*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
20. Extension.extension:type.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Control1..1
Typeuri
XML RepresentationIn the XML format, this property is represented as an attribute.
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Fixed Valuetype
21. Extension.extension:type.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Control10..1
TypeChoice of: CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
22. Extension.extension:type.value[x]:valueCodeableConcept
SliceNamevalueCodeableConcept
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Control10..1
BindingThe codes SHALL be taken from Resolved Timing TypeFor codes, see (unbound)
TypeChoice of: CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
23. Extension.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Control1..1
Typeuri
XML RepresentationIn the XML format, this property is represented as an attribute.
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Fixed Valuehttp://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-resolved-timing
24. Extension.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Control0..01
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] NoteSee Choice of Data Types for further information about how to use [x]
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1. Extension
Definition

Resolved timing reflects whether a measurement (Observation, QuestionnaireResponse or Media) has been performed ad-hoc or as fulfillment of a measurement regime time slot in which case the extent of the time slot is given by start and end. If the measurement regime has a form for which a time slot cannot be resolved or determining is/was not supported, the type unresolved is used.

Control0..* This element is affected by the following invariants: ele-1
2. Extension.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
3. Extension.extension
Definition

An Extension

Control2..*
TypeExtension
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
4. Extension.extension:serviceRequestVersionId
SliceNameserviceRequestVersionId
Definition

An Extension

Control1..1
TypeExtension
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
5. Extension.extension:serviceRequestVersionId.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
6. Extension.extension:serviceRequestVersionId.extension
Definition

An Extension

Control0..0
TypeExtension
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
7. Extension.extension:serviceRequestVersionId.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Control1..1
Typeuri
XML RepresentationIn the XML format, this property is represented as an attribute.
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Fixed ValueserviceRequestVersionId
8. Extension.extension:serviceRequestVersionId.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Control1..1
Typeid
[x] NoteSee Choice of Data Types for further information about how to use [x]
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
9. Extension.extension:serviceRequestVersionId.value[x]:valueId
SliceNamevalueId
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Control1..1
Typeid
[x] NoteSee Choice of Data Types for further information about how to use [x]
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
10. Extension.extension:start
SliceNamestart
Definition

An Extension

Control0..1
TypeExtension
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
11. Extension.extension:start.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
12. Extension.extension:start.extension
Definition

An Extension

Control0..0
TypeExtension
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
13. Extension.extension:start.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Control1..1
Typeuri
XML RepresentationIn the XML format, this property is represented as an attribute.
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Fixed Valuestart
14. Extension.extension:start.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Control1..1
TypedateTime
[x] NoteSee Choice of Data Types for further information about how to use [x]
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
15. Extension.extension:start.value[x]:valueDateTime
SliceNamevalueDateTime
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Control1..1
TypedateTime
[x] NoteSee Choice of Data Types for further information about how to use [x]
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
16. Extension.extension:end
SliceNameend
Definition

An Extension

Control0..1
TypeExtension
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
17. Extension.extension:end.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
18. Extension.extension:end.extension
Definition

An Extension

Control0..0
TypeExtension
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
19. Extension.extension:end.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Control1..1
Typeuri
XML RepresentationIn the XML format, this property is represented as an attribute.
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Fixed Valueend
20. Extension.extension:end.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Control1..1
TypedateTime
[x] NoteSee Choice of Data Types for further information about how to use [x]
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
21. Extension.extension:end.value[x]:valueDateTime
SliceNamevalueDateTime
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Control1..1
TypedateTime
[x] NoteSee Choice of Data Types for further information about how to use [x]
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
22. Extension.extension:type
SliceNametype
Definition

An Extension

Control1..1
TypeExtension
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
23. Extension.extension:type.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
24. Extension.extension:type.extension
Definition

An Extension

Control0..0
TypeExtension
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
25. Extension.extension:type.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Control1..1
Typeuri
XML RepresentationIn the XML format, this property is represented as an attribute.
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Fixed Valuetype
26. Extension.extension:type.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Control1..1
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
27. Extension.extension:type.value[x]:valueCodeableConcept
SliceNamevalueCodeableConcept
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Control1..1
BindingThe codes SHALL be taken from Resolved Timing Type
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
28. Extension.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Control1..1
Typeuri
XML RepresentationIn the XML format, this property is represented as an attribute.
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Fixed Valuehttp://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-resolved-timing
29. Extension.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Control0..0
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] NoteSee Choice of Data Types for further information about how to use [x]
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))